Getting Rid of Blowing Sand on Your Outdoor Shed and What You Can Do

Introduction

Blowing sand is a problem on many coastal homes. It can be caused by high winds, which pick up sand and blow it into your yard where it settles on everything from lawn furniture to siding. The good news is that you can prevent this nuisance by sealing off openings around windows and doors so air cannot get inside your shed. However, before we get into prevention methods let’s talk about what causes blowing sand in the first place:

Blowing sand can cause a lot of damage to the outside of your shed. Is there anything you can do about it and will it be successful?

Blowing sand can cause a lot of damage to the outside of your shed. Is there anything you can do about it and will it be successful?

Blowing sand can be caused by wind, rain and storms. The particles get blown into your yard and then become lodged on the surface areas such as outdoor sheds. This can cause damage to your shed if you are not careful when removing it.

So what can you do to prevent blowing sand from accumulating?

If you want to prevent sand from accumulating on your outdoor shed, here’s what you can do:

  • Use a threshold. Install thresholds at doorways and window openings to prevent blowing sand from entering the structure. This is an inexpensive way to keep out all kinds of debris, including insects and small animals like mice that are looking for shelter in your shed.
  • Seal all openings with caulk or tar. This is another easy way to keep bugs and rodents out of your structure without paying much money for it! All you need is caulk or tar (we recommend using both) and some time before applying it around any cracks where air could enter the building through these areas. You may also want to do this in conjunction with using weatherstrips as well depending on how big each opening is because we wouldn’t recommend using just one method alone when dealing with doors/windows that open vertically onto flat surfaces unless those surfaces were perfectly sealed themselves beforehand without any gaps whatsoever anywhere nearby where wind could blow through them; otherwise there would be no reason why anyone would bother installing such things in the first place because if there are already gaps present then even if they were filled up tightly enough once finished nothing would stop them being reopened later down the line when conditions changed again like they always do eventually even though sometimes not as quickly than others depending upon whether someone else has done something else aside from us right now…

First, you need to find where the problem exists and determine how severe the problem is.

The first thing you need to do is check for cracks in the siding, roof and foundation. The best way to locate these problems is by using a flashlight at night or early in the morning when it’s still dark. You can also check for gaps around doors and windows, as well as around the foundation itself. If you see any gaps, take care of them immediately before blowing sand has a chance to get into your shed in large amounts.

You may be able to find small cracks with just one eye but it will probably help if you use both eyes together so that each eye sees something different from what’s happening inside your outdoor shed area (this will help prevent mistakes).

Sand blows in through cracks in the siding and build-up against windows and doors.

Sand blows in through cracks in the siding and build-up against windows and doors.

The sand builds up against windows and doors is a problem because it can cause damage to the outside of your shed.

To prevent sand build-up at doorways and window openings, install a threshold across the opening. A threshold is simply a board that sits on two 2×4 blocks. The exposed edge is raised above the edges of the floor so that a vacuum is created under the threshold as air passes over it. This prevents blowing sand from moving into any structure near unyielding surfaces such as your shed walls.

Oops! Click Regenerate Content below to try generating this section again.

You can also eliminate opportunities for sand to drift inside your shed by using caulk or tar to seal openings that lead outdoors. Make sure you seal every crack and cranny where wind can enter. It’s also important to seal all major openings such as doors and windowsills with weather strips and caulking.

You can also eliminate opportunities for sand to drift inside your shed by using caulk or tar to seal openings that lead outdoors. Make sure you seal every crack and cranny where wind can enter. It’s also important to seal all major openings such as doors and windowsills with weather strips and caulking. This will keep that chill breeze from blowing through these areas, which will help keep the sand out of your home.

Conclusion

Ultimately, there is no magic bullet to prevent blowing sand from building up on your shed. If you’ve got a shed that’s been through the ringer with blowing sand and damage, it may be time for a new one! However, if you want to keep your current shed in good condition for years to come then simply follow these tips for preventing the accumulation of blowing sand on them.

Leave a Reply