Three Tips for Using Soaker Hoses


Soaker hoses are an excellent way to water your garden. However, there are a few tips on how you can use soaker hoses that will make them more effective and save you time and money in the long run. Here are three of my favorite tips!

Place your soaker hose on the surface of the soil.

It’s important to know where you should be placing your soaker hoses, and not to bury them. You want to place the soaker hose on top of the soil, so that it reaches down into it. This is also a good way for you to avoid having water pooling under your plants or near them as well. So, when placing your soaker hose in a straight line or grid pattern, make sure that you keep this information in mind!

Also keep in mind that there are many different types of circles that can be used with these kinds of hoses (or if they’re placed next to one another). If you’re looking for more ways than just what I’ve mentioned here today then check out some other blogs by Googling “how do i use my soaker hose” or something similar like that.”

Don’t bury your soaker hose!

You may have heard that soaker hoses are designed to be laid flat on the surface of the soil, and this is true. In fact, it’s important to know that soaker hoses are not designed to be buried or laid in a trench or hole, as these practices can result in leaks and a shortened lifespan for your soaker hose.

If you would like to lay your soaker hose at an angle, you should consider using a worm-drive reel (also referred to as a turntable) which allows you to easily adjust the orientation of your watering system without creating any kinks in the line.

Leave your soaker hose in place and turn it on for half an hour or so once each week.

Leaving your soaker hose in place and turning it on for half an hour or so once each week will help water your lawn more effectively. The longer you leave the soaker hose in one spot, the more water will be delivered to that area. This is because the soil will absorb some of the water along with some of its nutrients. When you move your hose from one spot to another every month or two, these nutrients are lost because they are not replenished by new fertilizer application as they would be if you leave them in a single location over time.

Soaker hoses should not be buried because burying them prevents them from draining properly when turned off; this can cause mold and mildew growth inside of them which will reduce their lifespan considerably (think about how long it takes for moldy clothing items). If you do bury a soaker hose please make sure it drains well enough after use (use sand beneath) since doing otherwise may result in clogged valves which could eventually lead to replacement costs due to no longer being able to use certain parts anymore such as those found inside faucets–this can also lead back again though with damaged equipment which needs cleaning regularly plus replacing damaged parts every few months depending upon usage patterns!

Three Tips for Using Soaker Hoses: A blog about how to use soaker hoses along with other related tips.

Soaker hoses are an easy way to water your garden, and they can be placed outside without much hassle. However, there are some things you should keep in mind when using soaker hoses. First of all, they should not be buried in the ground; instead, they should be placed on the surface of soil and left there until you’re ready to water again. Secondly (and this is very important), soaker hoses must run for half an hour once each week in order for them to do their job properly. If you don’t want any issues with your plants later on down the road (such as mold growth or rotting), follow these tips closely!


This is just a basic overview of how to use soaker hoses. There are many more tips and tricks on the internet that you can use to get the most out of your soaker hoses.

Leave a Reply