How To Make a Raised Vegetable Garden Bed

Introduction

There are many reasons to make your own raised vegetable garden bed. Raised beds offer several advantages over planting in rows on a slope or in a flat patch of ground. They create better soil conditions for plants, can help keep weeds at bay, and they look great too! In this article we will discuss how to make your own raised garden bed. We’ll walk you through the steps of making one and provide some pointers on what tools you may need to complete it successfully.

A raised vegetable garden bed can look beautiful, and it solves problems with planting in poor soil or high weed density.

Here are some ideas to get you started:

  • If you plan on making it accessible to people with mobility issues (such as wheelchair users), make sure the raised garden bed is at least two feet off the ground and that there’s enough room between rows for wheelchairs and walkers.
  • If you’re planning on making your vegetable garden accessible to people who are visually impaired or hearing impaired, consider including a raised bed where they can easily identify plants by touch. The best way to do this is by using Braille labels on each plant; however, if you don’t have any Braille stickers lying around, try using words that are easy for those who are visually impaired or hearing impaired (such as “green,” “mushrooms,” etc.).

There are many ways to make a raised bed, but we chose this one because it allows you to customize the size and shape of your bed, and it’s easy to put together.

There are many ways to make a raised bed, but we chose this one because it allows you to customize the size and shape of your bed, and it’s easy to put together.

You can customize the size and shape of the bed

This is an image from the [link] website where we got our plans for this raised garden bed. The plans were based on [link] #raisedbedplans#bedextension

This type of bed is made of cedar boards, but could be made with redwood if you want a more weather-resistant material.

If you want to make your garden beds more weather-resistant, redwood is the better option. However, if you can’t afford to spend the extra money on redwood, cedar will work fine as long as they are treated with a preservative such as creosote or linseed oil. If you notice any rot occurring in your soil or if pieces of board begin to break off during use, then it may be time for a replacement.

This type also has legs that raise the bed, making it easier for someone with limited mobility to still be able to tend the garden.

  • If you or someone in your household is not able to bend down easily, a raised bed may be the answer.
  • Some people are unable to bend over because of back problems, knee or hip pain, or other reasons. The raised bed makes it easier for them to tend the garden and harvest what they grow.
  • For older people who may have trouble bending over due to age-related arthritis and other conditions, this type of garden is ideal. They can still enjoy growing their own food without having to go through any hardship getting it from the ground up into their hands.
  • People with limited mobility can also use this type of garden design because there isn’t an excessive amount of bending involved when tending them (as compared with digging into soil).

Here are the supplies you’ll need:

  • Cedar boards. You’ll need cedar boards to line your raised bed with. Use untreated cedar, which is naturally resistant to rot and decay. You can find untreated cedar at your local home improvement store or lumberyard, but if you have access to a sawmill or woodworker who might be able to split some for you, that’s even better since it will be less expensive and easier to work with than regular lumber.
  • Hammer drill and masonry bit. Any good hammer drill will work for this project—just make sure it has enough power! A masonry bit is needed only if you use treated lumber as your platform base instead of concrete pavers (which is possible if you’re planning on making smaller beds).
  • 2x4s (optional), 2x6s (optional), 2x8s (optional), 2x10s (optional), 2x12s (optional), and 2x16s (optional). These are all standard dimensions of wood used for building; the vertical supports in each box should measure approximately 6 inches wide by 18 inches long for each side panel of your bed frame, though feel free to experiment with making them wider or narrower depending on personal preference!

You’ll need a hammer drill and masonry bit (1/4in) for this project. If you don’t have either tool, you can rent them from us!

You’ll need a hammer drill and masonry bit (1/4in) for this project. If you don’t have either tool, you can rent them from us!

  • If you don’t want to buy or rent the tools, here are some alternative ways to build your raised garden beds:
  • For the bricks, use a drill with a masonry bit. You’ll cut grooves around each brick that will allow water to drain away from the bed in rainstorms. Be sure not to use too much pressure on your drill because it might break through the brick!
  • For the wood planks, use a chisel instead of a hammer drill—it’s safer that way!

Making your own raised bed is an easy way to control the quality of your soil, and can keep weeds at bay!

Making your own raised bed is an easy way to control the quality of your soil, and can keep weeds at bay! There are many things you can do with a raised bed, such as gardening or planting flowers. You can also make a custom design for your garden using wood or metal.

Raised beds are great for growing vegetables because they’re easy to reach into without having to bend over too much. They’re also easier on your knees and back—probably one of the reasons my grandma always had fresh tomatoes from her garden in July!

Conclusion

Hopefully, we’ve given you some inspiration to get started on your own raised bed! If you have any questions or comments, feel free to leave them in the comments below.

Leave a Reply