25 Soaker Hose Tips and Tricks


If you have a large yard or garden, then you know how difficult it can be to water all of your plants. The best way to make sure that your plants get enough water is with a soaker hose. These hoses are incredibly useful because they allow you to move them around without damaging the roots of your plants. In this blog post, we will discuss 25 different ways that you can utilize your soaker hose for watering purposes!


Mulch can help retain moisture and nutrients in the soil, keep weeds out of your garden, help keep soil cool in the summer, prevent erosion and prevent soil from becoming compacted.

You might think that mulching with hay or straw is a great idea for helping to maintain healthy soils. If you are using straw as mulch near trees or shrubs, it may be a good idea (depending on how dry your area gets) to put down a weed barrier first before putting down the hay or straw. The weed barrier will prevent any unwanted growth from appearing in between where you placed your hay/straw pile.

Watering Routine for Trees

Trees are a vital part of your landscaping plan, but they can be difficult to water. Soaker hoses make watering trees easy!

Watering routine for trees:

  • Set up soaker hose around the tree.
  • Run the water slowly over the entire area where you want to keep grass from growing.
  • Turn on water at night before going to sleep and turn off in morning when you get up.

Planting Flowers

Soaker hoses are a great way to water flowers. They’re also useful for watering flowers in pots and window boxes, but they can’t be used directly on the ground because they don’t have an open end.

To use a soaker hose to water your flowers:

  • Make sure you have enough length of soaker hose that will reach from where your faucet is located all the way out to where you want your flowers watered (if using more than one section of soaker hose, make sure that their ends meet up). If you don’t have enough length for this area, consider attaching multiple sections together with connectors or purchasing longer pieces at your local hardware store.
  • Uncoil the first section of soaker hose and place it along side itself until it’s reached its full length from where it comes out from under your deck/patio or wherever else it meets up with another piece of soaker hose (you can add more sections if necessary).
  • Attach one end of this new section by pressing its base into the lawn or soil until secure; then repeat steps 2-4 above until all sections are connected together at some point along their path from where they start at the faucet towards where all plants have been planted within reach!

Deep-Rooted Plants

If you have a deep-rooted plant and you want to make sure it is getting the right amount of water, consider using a soaker hose. These types of hoses have been designed to deliver water exactly where it needs to go without wasting any. The best part? You can use these hoses on almost every kind of plant!

If your plants do not require much attention or if they just need some extra moisture once in awhile, then this might be the perfect option for you! For example, if you are trying to grow tomatoes in your garden but don’t have time for them every day (or even weekly), then this type of hose would be perfect for watering them. While other methods may not provide enough water consistently enough throughout their growing season, soaker hoses provide more consistent flow which keeps plants healthy and thriving all year long.

Climbing Plants

Climbing plants are great for covering walls and fences. They can be trained to grow on arbors or trellises, fences, and trees. If you want to add some color to your outdoor space but don’t have a lot of time or money to spend on landscaping, then climbing plants could be your best option.

Beds around New Trees

New trees are delicate little things, and they need lots of water. If you’re trying to establish a new tree in your yard, it can be difficult to keep it watered. Soaker hoses are a great way to do this! A soaker hose is simply a hose that has perforations running along its length, pumping out water through these holes at regular intervals. When used correctly, these hoses will water plants with just enough pressure for them to really soak into the ground where they need it most—right at their base.

If you have just planted some new trees or shrubs in your yard, here’s how you should use a soaker hose:

  • Lay down your soaker hose around each plant’s drip line (the area where the grass meets the wooded area) before watering time starts. It should be about 6 inches away from each plant’s trunk or base; anything closer could cause damage by getting too close or creating mud puddles around newly-potted saplings if there’s too much rainwater sitting there after watering times end because no one watered it thoroughly enough first).
  • Set up your sprinklers inside this perimeter once everything has been watered thoroughly but still needs more attention before heading back indoors; make sure all sprinkler heads face outward toward where they’ll hit instead of facing inward towards their own backyards so they don’t spray themselves while trying something new!

Various Plants

Soaker hoses are a great way to water plants, but they don’t work for every plant. Some plants need to be watered regularly, while others can go longer without it.

  • Plants that need frequent watering include: vegetables and herbs (e.g., tomatoes), flowers (e.g., geraniums and petunias), fruit trees/bushes (e.g., blueberries), and houseplants (e.g., cacti).
  • Plants that can go longer between waterings include: roses, perennials, shrubs, ground cover like ivy or mosses on rock walls; grasses like centipede grass; bamboo in pots; palm trees

Shrubs and Roses

  • You can use soaker hoses to water shrubs and roses. Soaker hoses are especially suited for this purpose because the water is slow to dry out, which helps prevent wilting and brown leaves.
  • If you have shrubs or flowerbeds that are hard to reach with traditional sprinklers, a soaker hose may be a better option than traditional sprinklers.

Bush Plants

Soaker hoses are also a great way to water bushes and trees, as they allow you to water the entire root system. You can use soaker hoses to water rosebushes, shrubs or even larger trees. If you have a large tree that needs watering regularly (and has a large area of roots), then consider using a soaker hose to protect those roots from being damaged by hoses or sprinklers.

Soaker hoses are also great for plants that need regular watering throughout the season such as tomatoes, peppers and other vegetables or fruit plants that require plenty of moisture while they grow. These types of plants tend to do well when watered from below since their roots will be able to absorb moisture from the ground rather than just relying on rainfall alone during dry periods which could lead them into dehydration later in life when it matters most!

Vegetable Garden Area

Soaker hoses are a great option for watering vegetable gardens.

  • They’re easy to install, so you won’t have to worry about digging trenches or laying down tile.
  • They’re easy to use and maintain, as you can control the flow of water with a simple twist of the faucet handle.
  • They’re cheap! Soaker hoses are inexpensive compared to other types of irrigation systems, like sprinklers or drip systems.
  • And if that wasn’t enough: they’re environmentally friendly! Soaker hoses are made from recycled materials that don’t leach chemicals into your soil or pollute our rivers and streams, so there’s no need for harmful pesticides on your food crops either – yay!

Beds near the House Foundations

Soaker hoses can be used to water beds near the house foundations. The reason for this is because soaker hoses are designed to water at the base of plants, and the soil around a foundation can be saturated with water in less than two inches. This makes it difficult for plants or seeds to get enough nutrients out of the soil if they sit too close together. By watering from above, you help them grow healthier roots that will reach into deeper layers of dirt, which are rich with nutrients needed by growing plants.

Thirsty Plants in Raised Beds

If you have raised garden beds, a soaker hose is the perfect tool to use in order to water your thirsty plants. Soaker hoses work best when they are placed directly in the soil beneath the plant and will disperse water at the roots. If you are using a soaker hose for this purpose, make sure that it is being used on its own—don’t run it along with your drip irrigation system.

Starting a New Garden Bed Around Your House

Now that you know how to use a soaker hose and have some tips to make it easier, here’s an easy project for you. When I moved into my house, there was no garden space in the back yard. So I decided to start a new garden bed around my house.

The best way is to use the soaker hose method because it will ensure even watering without wasting any water or overwatering one area more than another.

Drip System for Lawns and Flowerbeds

You can use a soaker hose to water your lawn or flowerbeds. You will need the following materials:

  • Soaker hoses
  • A drip system
  • A timer (optional)

The drip system will have holes along one side of it, and you’ll want to place it just above where you would like the water to be dispensed. The number of holes will affect how much water is released at once; if you’re looking for a steady supply of water over time, choose one with fewer openings. If you’re looking for a burst of light watering that lasts only a few minutes before stopping completely, then choose one with more openings.

The timer is optional but recommended if there’s not somebody around who can turn off the tap when needed (or if there’s no tap). To install this device, follow these steps:

  • Place an empty bucket under where you want your timer to be located; this will catch any dripping from excess moisture coming out from underneath once everything has been connected together properly again afterwards!

Getting Rid of Weeds and Grasses Between Pavers or Flags

To get rid of weeds and grass between pavers or flags, you can use a soaker hose. This is one of the most effective ways to water a garden because it provides even coverage throughout the area without wasting water by running off or evaporating. Soaker hoses are also made from recycled materials, making them very eco-friendly!

Watering Fruit Trees with a Soaker Hose. A blog about ways that you can utilize a soaker hose.

Soaker hoses are the perfect way to water your fruit trees, vegetable gardens, and flowerbeds. They’re also great for watering lawns. The soaker hose can be placed under the mulch around your plants and only sprays water when you activate it at the spigot. If you have a large yard with many trees and plants that need watering regularly this is an ideal product!


If you’re looking for some great tips on how to use a soaker hose, we hope this article has given you some ideas. Soaker hoses are an excellent tool for watering your plants and flowers, and they can save you time and money in the long run. If you want to learn more about this topic, check out our blog post 25 Soaker Hose Tips and Tricks: A blog about ways that you can utilize a soaker hose.

Leave a Reply